X10 Desk with Leather In-Lay, Return Unit and Pedestal

Description

Real wood veneer desk with RH/LH return unit and supporting pedestal, desktop with leather in-lay.

Pedestal comes with full extension metal drawers and stylish epoxy powder coated or chrome plated metal handles.

1.3mm abrasion resistant leather in-lay embellished with matching stitching.

3 Drawer + 1 Pen Drawer Supporting Static Pedestal.

Available with a matching 18mm veneered Modesty Panel.

Tilting and demountable Cable Basket available for easy cable access.

Tops are 18mm veneered MDF board. Matt transparent semi-open pore varnishes 0.6mm wood veneer, 0.5mm radius corners, 1mm thick wood veneer edging. Front and back of the top are 90° folded to form 50mm high sides whose grain, being part of the same board, lines up perfectly with the top.

18mm melamine faced particle board with 0.5 radius corners and 0.4mm melamine edging. Front and top is 90° folded to form a 50mm high side edge. Top and edge outer surface covered with 1.3mm abrasion resistant leather embellished with matching stitching.
Slightly angled legs with leg bottom shorter than top. Inner frame made of wood honeycomb covered with veneered MDF curved boards. Matt transparent semi-open pore varnished 0.6mm varnished wood veneer. Both legs come with an upper cut-out to accommodate epoxy powder coated steel trays along with brushed extruded aluminium soft close flaps complete with brush strips for easy access to cables and ports.

Cable trays are provided with cut-out to route cables down to floor level via a vertical channel inside the legs. Each leg come with two 0-15mm steel manually adjustable levelling feet with round Abs molded scratch resistant base.

3 drawer and 1 pen drawer static pedestal made of 18mm veneered particle board. Matt transparent semi-open pore varnished 0.6mm wood veneer, 1mm thick wood veneer edges, 0.5mm radius corners. Silver finished epoxy powder coated metal drawers, central locking with two folding keys, full extension metal slides with safety stop mechanism, soft close for silent low impact drawer closing, anti-tilt. Stylish epoxy powder coated or chrome plated metal handles.

The return top is supported on the pedestal via a cylindrical Ø100mm 2mm thick steel spacer provided with lower and upper metal plates. Brushed chrome finish. Four adjustable levelling feet.